Performance improvement of a single-flash geothermal power plant in Dieng,Indonesia, upon conversion to a double-flash system using thermodynamic analysis

We investigated proposed design of a double-flash system and compared it to the existing single-flash power plant in Dieng, Indonesia, which uses waste brine from a high pressure separator. The performance of the double-flash system was evaluated using the second law of thermodynamics, and this was based on energy and exergy analyses. The Engineering Equation Solver (EES) was used to solve the relevant mathematical equations.Our results indicate that the double-flash design is interesting for application in Dieng since the power output would increase by 19.97%. Moreover, the precipitation system to avoid silica deposition in the injection well does not have to change much. Therefore, the building costs associated with the new double-flash system would be minimal. The available exergy from the reservoir is 66,204 kW based on the enthalpy determined by TFT (Tracer Flow Test) measurements. The single-flash power plant has a net power output of 23,400 kW with a second law efficiency of 36.7%. In the double-flash design, components such as a LPS, a second purifier and an HPT would be added to the plant. Furthermore, our calculations indicate that the power plant's output and second law efficiency would increase to 29,155 kW and 44.04%, respectively. The waste brine disposed of using this precipitation system would decrease by 8.22% at 5443 kW.     

燃机电厂管线综合布置分析与探讨

从工程实例出发,文章简单介绍了燃机电厂的管线特点,对厂区管线重点区域的具体布置方法进行了分析,以探讨在管廊通道与节约用地之间作出合理的选择。     

PTA装置扩产氧化母液罐挖潜——搅拌器改造

上海石化0.4 Mt/a PTA装置扩产改造中,TJ-302氧化母液罐处理量不能满足需求,需要大幅度加快循环速度,在原有设备上增设搅拌器是最经济的选择。增设搅拌器后,又出现新问题,由于循环速度加快,设备中原有的固体含量增加,必须进行再改造。经充分的分析研究以及计算,增设了罐内轴滑动轴承,从而解决了上述问题。     

Evaluation of ergonomic approach and musculoskeletal disorders in two different organizations in a truck assembly plant

The aim of this study was to assess the ergonomic physical exposure, organizational and psychosocial factors in a truck assembly plant for two different cycle times (11 min and 8 min). A self-reported questionnaire was applied to evaluate subjective physical exposure, organizational and psychosocial factors by operators in two organization of an assembly process. The initial cycle time was 11 min (system A) and the new was 8 min (system B). The same work and assembly tasks had to be completed in both systems. However, the organization and distribution of the tasks and workstations were reorganized. The results of the questionnaire showed that subjective estimation by the operators regarding ergonomic risk factors was better in the new organization and self-reported WR-MSDs symptoms were fewer. However, exposure to risk factors and WR-MSDs symptoms was not statistically different between two cycle times. The findings provide better understanding of how organizational changes can modify ergonomic exposure in manufacturing assembly industries. Effective interventions are thus not only engineering solutions but also organizational and administrative adaptations.     

巨型水电站孤岛试验期间AVC电压波动的解决

本文首先分析国内典型的AVC的一般配置、控制策略和控制原理,针对巨型水电站孤岛试验期间的AVC控制的复杂工况进行阐述,对出现的AVC电压波动的情况进行分析,并对采用的解决方案进行介绍,为今后类似电站的孤岛运行期间的AVC电压控制提供一些参考建议。     

Increased Uptake of Chelated Copper Ions by Lolium perenne Attributed to Amplified Membrane and Endodermal Damage

The contributions of mechanisms by which chelators influence metal translocation to plant shoot tissues are analyzed using a combination of numerical modelling and physical experiments. The model distinguishes between apoplastic and symplastic pathways of water and solute movement. It also includes the barrier effects of the endodermis and plasma membrane. Simulations are used to assess transport pathways for free and chelated metals, identifying mechanisms involved in chelate-enhanced phytoextraction. Hypothesized transport mechanisms and parameters specific to amendment treatments are estimated, with simulated results compared to experimental data. Parameter values for each amendment treatment are estimated based on literature and experimental values, and used for model calibration and simulation of amendment influences on solute transport pathways and mechanisms. Modeling indicates that chelation alters the pathways for Cu transport. For free ions, Cu transport to leaf tissue can be described using purely apoplastic or transcellular pathways. For strong chelators (ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA)), transport by the purely apoplastic pathway is insufficient to represent measured Cu transport to leaf tissue. Consistent with experimental observations, increased membrane permeability is required for simulating translocation in EDTA and DTPA treatments. Increasing the membrane permeability is key to enhancing phytoextraction efficiency.     

Microwave assisted water extraction of plant compounds

The development of environmentally friendly processes with limited generation of polluting streams to attain sustainable utilization of raw materials is encouraged. The implementation of novel extraction technologies more efficient, selective and with lower energy consumption than conventional ones, can help in achieving this objective. Particularly promising are aqueous based methods, since water is a cheap, safe and abundant solvent and the limited use of toxic organic solvents is a consumer's, ecological and processing demand. The benefits and the limiting aspects of microwave assisted water extraction, either adding water as the only solvent or in solvent free processes, using the naturally present water in vegetal materials for the extraction of valuable components from renewable vegetal sources are highlighted and the potential of this technique for industrial applications is discussed. © 2014 Society of Chemical Industry     

核电厂聚乙烯管道设计方法及标准简介

随着聚乙烯管道在三门核电厂、大亚湾核电厂中的试应用成功，大量的新建核电厂及核电厂改造项目均将聚乙烯管道作为海水冷却水管道系统的首选管材，自主研制核电厂聚乙烯管技术标准迫在眉睫。本文介绍了核电聚乙烯管道的发展历史和应用现状，对比了核安全3级聚乙烯管道和非核安全相关聚乙烯管道、城市燃气与给水聚乙烯管道技术标准的设计方法及适用范围，探讨了中国目前聚乙烯管技术标准与核3级聚乙烯管道技术标准的差异与差距，为核电厂聚乙烯管道的设计制造与标准研制提供参考。